Operate Thermal Oil Heaters Safely

1. Bidragon thermal oil heaters use thermal oil as the heat carrier medium,  to make sure the heating process safe and improve the heating performance, this system should be equipped with expansion tank, storage tanks, security components, measuring instruments and controller. 2. When firstly run the thermal oil boiler, operator should start and run the circulating pump for 30minutes ,  and then the ignition. For the first time, the temperature should be rised sloly about 20℃ per hour. when the temperature reaches 180 ~ 200 ℃, operator should stop heating and keep it stay at 180~200℃ for a while, and then continue the heating. 3. The whole thermal oil heating system should be carefully checked to prevent water, acid, alkali and impurity materials leak into the circulation oil.  A thermal oil boiler should be installed filtration device to prevent all kinds of debris and ensure the purity of the oil. 4. Oil analysis should be conducted every 6 months, especially after long-term use, if operator found the heat transfer ability is poor , or other abnormal situations, operator should consider the oil analysis report and determine if the oil should be replaced. 5. Never set the temperature higher than the rated temperature of the thermal oil boiler

Related Items

  • Product Categories

  • Contact Us

    Contact: Macros Zhang


    Fax: 0086-372-2190333


    Skype: hwbzzm

    Headquarters: No.2-1803 Soubao Business Center, No.16 South-West Third Ring Road, Beijing, China.

    Factory Address:Hi-tech Development Zone, Anyang City, China.

    Trade Department:No.9-607 YingBin Business Building, No.609 Wenfeng Road, Anyang city,Henan Province, China.